SOPs and Checklists for a Handyman Business

Direct answer: An SOP (standard operating procedure) is a written list of steps you follow the same way on every job of one type. Start with the jobs you do most. Write the steps in order, write what to bring, test the list on real jobs and fix it. Once the steps are on paper, a helper can follow them without you.
Everything below comes from Ray Duke's own videos, including the sample checklists, which are processes Ray describes doing on his jobs.
- Hinges first on every door, before anything else
- About 30 job kits in Ray's van, each with a written inventory
- 12 grand a year Ray figures from saving 10 minutes on 3 jobs a day
A business, not a job
If every call, estimate and repair needs you, the business stops when you get sick or hurt. Written systems are how you fix that.
The next step is going to be clearly to start creating some systems in place where I can plug other people into those systems and actually scale this business and ultimately turn it into a business that I can step away from. Because if I don't do that, if the business still requires me every single day making all the decisions, making all the calls, talking to all the clients, doing all the estimates, if I have to be involved day in and day out, then I haven't really built a business. I've just built a job.
How SOPs add value
Ray is open that this is still a work in progress for him. He tested his kits with his son and says he will keep testing them with an employee while he builds new ones.
So the purpose of this kit is to save that trip to Home Depot.
You have to make everything efficient first, and then you have to make everything systematized second. But once you've got your efficiencies worked out and then you've built your systems, then you can just plug and play employees directly into these roles.
But the long-term result is going to be that I'm going to be able to step away from this business or sell it.
- Fewer trips to the store: A kit built from a written inventory means you show up with the parts. Ray: the value of a job goes down, not up, when you have to leave for parts.
- Minutes become money: Ray figures saving 10 minutes on each of 3 jobs a day comes to about 12 grand a year.
- Someone else can do the work: Written steps let you train a helper instead of hoping a new hire already knows your way.
- You can step back, or sell: Ray's long-term goal is a business he can step away from or sell, while it keeps running.
Write your first SOP
The next thing you're going to do, if you want to, let's say, have an employee who can follow this system, is write those steps down. And you want to be able to train that employee. You don't want to rely on just hiring a bunch of other handymen and hoping they know what they're doing. You want a reproducible product if you're going to call this a business.
- Pick a job you do all the time: Doors, sink plumbing and dead outlets are good first ones. Ray says almost every door gets the same process no matter what's wrong with it.
- Write the steps in order: Write the order you check things and the tests you run at the end. Keep it short enough to use on the job.
- Write what to bring: List every tool and part for that job type. Ray keeps a paper inventory inside each kit, and every kit is signed in and out.
- Use it and mark it up: Each time you use the kit or list, write down what to change. Ray's sheets are covered in his own notes.
- Train from it: When you hire, teach from the written steps so every job comes out the same.
Sample checklist: any standard door
Ray works on the whole door even when the work order only names the deadbolt. Hinges come first because tightening them later throws off every adjustment you already made.
For your standard exterior doors, always check your hinges before you work on anything else on that door. Half the time the hinges are loose and the door is not hanging right, so get the hinges tightened in before you touch anything else.
But I don't just come in and fix one teeny tiny little problem on a door. I always start at the hinges and I make sure that by the time I'm done, I've just adjusted and checked the entire door.
Checklist
- Check every hinge first. Tighten the screws into the frame and into the door before you touch anything else.
- Check the weather stripping. It should be there, in place and in good shape.
- Shut the door so it latches. Make sure the strike plates are solid and the door touches the weather stripping all the way around at the latch point.
- Adjust the deadbolt last, so it opens and closes smoothly.
- Work your way from the hinges out to the knob and deadbolt until the whole door is checked and adjusted.
Sample checklist: sink plumbing leak check
Ray runs this on any sink he touched, whether he changed anything or not, so a slow leak can't be blamed on him later.
What I always do with any sink plumbing, whether I did anything or not, is I filled both sinks all the way up with plugs in the bottom, go underneath, make sure there's nothing's wet, wipe everything down with a dry rag, pull both the plugs. That forces a lot of water down through the pipes all at once, so there's no chance that you have a leak.
Checklist
- Put the stoppers in and fill both sinks all the way up.
- While they fill, go underneath and feel every pipe. Wipe everything down with a dry rag.
- Pull both plugs at once to force a lot of water down the drains.
- If there is a garbage disposal, turn it on while the sinks drain. It pressurizes the drain lines.
- Watch and feel underneath for leaks. Ray suggests doing it twice.
- Don't leave until nothing is wet.
Sample checklist: an outlet that doesn't work
If you ever have an outlet that doesn't work, first thing you do really is look for GFIs ... if you can just do a quick walk through and find any GFIs and make sure they're all reset. That's a big deal. It's not half the time, but like 40 percent of the time that's going to be your problem.
Checklist
- Test the outlet to confirm it's dead.
- At the breaker panel, flip the breakers off and back on. A tripped breaker can look like it's still on.
- Walk the house and find every GFI outlet: kitchen, bathrooms, outside, basement. Reset each one.
- Only then start troubleshooting with your meter.
Sample checklists: before you start and before you leave
Ray learned these the hard way. He once replaced every switch in a house, and an owner blamed him for a switch that had been disconnected long before he got there.
Had I checked everything first, I could have just tested every switch and said this switch doesn't seem to do anything, document it down, email the property manager before I start and say, hey, I haven't removed anything. I just want you to know here's an outlet that doesn't work, here's a switch that doesn't seem to do anything ... I just want you to know the condition of things before I start.
So the big lesson here is test everything, take pictures of your surroundings, make sure that the condition before you work is known and documented officially before you start doing stuff.
That way, if they question why we did or didn't do something a certain way later, we can point back to the original request and show why we did or did not do whatever it is they're asking about.
Checklist
- SCHEDULING TEXT: schedule by text from a saved template, so there's a written record. It steers the client to times that fit your schedule, asks for an adult over 18 to be home, explains your arrival window and says how long the job should take.
- JOB RECORD: paste the client's original request into the job word for word, spelling errors and all, and never delete it.
- BEFORE YOU START: test everything near your work (every switch, every outlet) and take pictures of the area.
- BEFORE YOU START: if something is already broken, write it down and tell the client or property manager before you begin.
- BEFORE YOU LEAVE: take a picture of the finished work, even items you didn't charge for.
- BEFORE YOU LEAVE: mark on the kit's inventory anything you used up, load everything back up and clean up.
- BACK AT THE SHOP: inventory the kit back in and put it on its shelf.
- IN YOUR CRM: attach the before and after pictures to the job.
Checklists for helpers
A checklist only works if it's used line by line. Ray says it's easy to think you know what you're doing and don't need one. Here is how he lays out a helper's day once the systems exist:
- For inspections, Ray walks the whole house once per item: all the walls, then all the door stops, then all the baseboard. Room by room, he says, you miss things.
- Blue tape next to a small defect marks it for whoever does the repair later.
It's easy to think that you really know what you're doing and that you don't need to use a checklist ... I do think that you need to use this line by line. You need to read every line.
But what I'm trying to point out to you is this entire story I just told you about this hypothetical door job that came in was none of it required me. None of it required the owner of the business. All of these things can be done via systems with employees.
- Day sheet: The office prints each helper's day sheets the afternoon before: the address, the type of work and which kits to take.
- Grab the kit: The day sheet says which shelf the kit is on. The helper takes it, checks it against its inventory, refills anything missing and signs the inventory.
- Same tools every time: The helper's EDC bag always holds the exact same hand tools, so nothing is hunted for on the job.
- Do the job by the list: Follow the written steps and run the tests at the end.
- Close it out: Mark what was used, clean up, bring the kit back and inventory it in.
Step-by-Step
- Pick a common job — Start with work you do every week, like doors, sink plumbing or dead outlets.
- Write the steps in order — Write the order you check things and the tests at the end, like hinges first on every door.
- Write what to bring — List every tool and part for that job type and keep the list in the kit.
- Use it and fix it — Mark changes on the list each time you use it.
- Train from it — Teach helpers from the written steps so every job is done the same way.
Frequently Asked Questions
What is an SOP for a handyman?
A written set of steps for one type of job that you follow the same way every time, plus the list of tools and parts for it. Ray's door process is an example: hinges first, then weather stripping, then the latch, then the deadbolt.
Which SOPs should I write first?
The jobs you do most often. Ray's examples are doors, sink plumbing leak checks and outlets that don't work, plus the steps before you start and before you leave a job.
How do SOPs make a handyman business worth more?
They make you faster, with fewer trips for parts, and they let someone else do the work the same way you would. A business that doesn't need the owner every day is one the owner can step away from or sell. Ray calls a business that needs you every day a job.
Do I need SOPs if I work alone?
Yes. Ray built his kits and lists as an owner-operator first. They save time on every job, and they're ready when you hire.