Handyman License Requirements in Shelby, TN

In Shelby (Shelby County), Tennessee, most “handyman” work can be done without a Tennessee contractor license as long as each job is under Tennessee’s contractor licensing threshold and you stay out of regulated trades (electrical/plumbing/HVAC). Even when exempt from a state contractor license, you may still need a city/county business license and building permits for certain types of work (water heaters, structural changes, new circuits, etc.).

⚠️ What Requires a Contractor License

The following work requires a state-issued contractor license in TN. Performing this work without a license exposes you to fines, stop-work orders, and civil liability:

• Any project priced at $25,000+ (labor + materials) typically requires a Tennessee contractor license through the Board for Licensing Contractors.
• Electrical work involving new circuits, service upgrades, panel work, rewiring, or commercial electrical contracting—typically requires licensed electrical contractor and permits/inspection.
• Plumbing work involving water heater replacement, moving/adding supply or drain lines, sewer line work, or significant plumbing alterations—typically requires licensed plumber and permits/inspection.
• HVAC installation/replacement or refrigerant-handling work—requires appropriate licensing for contracting and EPA Section 608 certification for refrigerants.
• Gas piping installation/alteration (often treated under mechanical/plumbing/gas fitting rules and requires permits and qualified/licensed persons).
• Structural modifications (load-bearing walls, beams, major framing), additions, or work that changes egress—requires permits and may require licensed contractors depending on total cost and local rules.
• Roof replacement or major roofing repairs may require permits and (if $25,000+) a state contractor license; some jurisdictions also require proof of insurance/contractor registration.

State Contractor Licensing Law (TN)

This exemption does NOT let you perform work that requires a separate state/local trade license (electrical, plumbing, HVAC/refrigeration, gas fitting in many contexts) and does not remove permit requirements. Also, splitting one project into multiple contracts to stay under the threshold is typically treated as evasion and can trigger enforcement.

County Requirements — Shelby

Business license: Required (County business tax license (required if operating in unincorporated areas or if the county is your licensing authority))

Special Jurisdictions & Zones

The following special jurisdictions may have separate licensing requirements:

• Naval Support Activity Mid-South (NSA Mid-South), Millington, TN (Shelby County) — If you are a subcontractor for a prime contractor already on-base, you may still need your own access badges for crews/vehicles.
• Federal contracting generally (any federal facility work in Shelby County, including federal buildings/courts/post offices) — Always verify whether the contracting officer requires state contractor licensing for the scope even if federal property is involved.

City Business License — Shelby

Required. City business license (if operating inside city limits) + TN business tax license

Permit vs. Contractor License — The Legal Difference

A license is your legal authorization to offer/perform certain work as a contractor/tradesperson. A permit is job-specific approval from the local building/code authority to perform a particular scope at a particular address (followed by inspections). Even if you are under the $25,000 contractor-license threshold, you can still be required to pull permits and pass inspections for regulated work.

Business Entity Registration (TN)

To operate legally you must register your business. LLC filing fee in TN: $300 (one-time).

Compliance Notes for Shelby in Shelby County, Tennessee

• Insurance: Tennessee does not generally issue a ‘handyman license,’ but customers, GCs, and property managers often require general liability insurance (commonly $1,000,000 per occurrence). If you have employees, Tennessee workers’ compensation rules may apply.
• Do not advertise as ‘licensed’ unless you hold the applicable state contractor license or local trade license. Advertising violations can trigger board enforcement.
• Keep each job clearly scoped and priced; if one project exceeds $25,000 total, you typically need the state contractor license—even if you plan to subcontract parts.
• Permits/inspections are often enforced more strictly than licensing for small jobs; check with the local codes department before starting work that touches MEP (mechanical/electrical/plumbing) or structure.

Legal Registration Steps for Shelby

Follow these steps to operate legally as a handyman in Shelby in Shelby County, Tennessee:

1. Step 1: Confirm your exact jurisdiction (City of Shelbyville vs. Shelby County/Memphis area) based on the job address and where your business is located.
2. Step 2: Register your business entity (LLC recommended) with Tennessee Secretary of State ($300 filing fee).
3. Step 3: Obtain a Tennessee business tax license through the correct city and/or county clerk (minimum tax commonly $15, plus gross-receipts-based tax).
4. Step 4: Get general liability insurance (and workers’ comp if applicable).
5. Step 5: If you will take any job at or above $25,000, start the Tennessee contractor license process with TDCI (fees listed above) and confirm classification/exam requirements.
6. Step 6: Call the local building codes/permits office for the address where you’ll work to confirm which handyman tasks require permits in that jurisdiction.

Work You Can Do Without a Contractor License

• General repair/maintenance work under $25,000 total contract (labor + materials), such as fixing doors, adjusting hinges/locks, and replacing interior trim (researched).
• Interior/exterior painting (non-lead abatement) under $25,000 (researched).
• Minor drywall patching/texture repair and painting (researched).
• Basic carpentry not affecting structural members (e.g., install baseboards, cabinets as like-for-like replacements, shelving) under $25,000 (researched).
• Replace faucets/fixtures like-for-like ONLY if local rules allow and no piping is altered; permits may still be required (variable by local code office).

Research generated by AI. Verify all information with local authorities before making business decisions.