When and How to Raise Your Handyman Prices

Direct answer: Raise your prices when your numbers say you're under your minimum rate, when nobody ever pushes back on your estimates, or when you're too busy to keep up. Do it a little at a time, 1% to 5% on the jobs you price, all through the year. Don't send clients an announcement. If you get pushback from good clients, hold or back off a bit, then try again later.
Expect to lose a few clients who only hired you because you were cheap. Ray says that is a necessary step, not a failure.
- $50–60K the ceiling Ray sees for handymen who don't charge enough
- 1% at a time: Ray's way to raise prices
- 3–6 months between Ray's looks at a line item's price
- 0 pushback on your estimates means you're probably too cheap
Why you have to raise them
And if you're not charging enough money for the hours that you are putting in on the job, you're just never really going to be able to break through that ceiling of $50,000 or $60,000 a year.
But you need to remember that you are not your ideal client. The price that you would be happy to pay for a job well done is not the same as the price that your ideal client would be happy to pay. So you're going to have to raise your prices.
Signs it's time
- Nobody pushes back: Ray: “I think my prices are still low because I get zero complaints on my pricing. I get zero pushback on my estimates. And I think even I even still need to raise my prices.”
- You're too busy: Ray: “But if you're cheap, raise your prices. And if you're not cheap, but you're still just too damn busy, raise your prices.” He calls charging more “probably the easiest way to just sort of like toggle and control your workload.”
- Your costs went up: Ray, on his 2025 pricing: “we've had a couple years now of really high inflation ... and if you're like me, you probably didn't raise your prices enough to keep up.” He raised his own internal rate from about $100 to at least $125 an hour.
- You're under your own minimum: Ray: “It's easy to say no to an offer to pay you $25 an hour to do a job when you know going in $25 an hour is my overhead. So I'm working for free when I'm working for $25 an hour.” The Hourly Rate Calculator gives you that minimum.
How often to review your prices
Ray doesn't pick one date a year. He nudges prices up in small steps all year and looks again at each line item every few months. Rerun your numbers in the calculator whenever your costs change.
And the easiest way to do that, by the way, is little bit by little bit over a very long course of time. Try not to just wake up one day and say, oh, my prices just went up 25%. Instead, try to just play with your pricing. Look at what you've been charging for everything that you've been charging for and little bits here and there, up 2%, up 3%, up 5%, and keep doing that throughout the entire year.
If I have something that I always charge $45 for, and three to six months has gone by and I'm doing that one again, I look at it and I go, let's bump it up to $48. Let's bump it up to $49. Let's bump it up to $55 and see what happens. And then if I get a little pushback, I just bump it back down. And then later on, I bump it back up and maybe I don't get pushback.
The idea is that as you build and grow your business and as you build and grow your business plan, you're going to come back into here and you're going to update all these numbers on a routine basis so that you always have a solid grasp on what your business's actual numbers are.
How to raise them, step by step
- Know your minimum: Run the Hourly Rate Calculator. Ray calls that rate “the absolute minimum that you will ever charge for the most unskilled labor.” Anything under it is working at a loss.
- Price by the job, not by the hour: Ray: “when you charge hourly, most of the things on this list that you can do to increase your revenue, they don't apply ...” Clients notice when an hourly rate changes. A job price can move quietly.
- Bump one line item at a time: When a job comes up again, raise its price 1% to 5%. Keep your prices as line items (in Jobber or a rate book) so you can see what you charged last time.
- Watch for pushback: From good clients, pushback means hold or back off a little. Try again in a few months.
- Raise across the board: Raise for everybody, not for the one client you dislike (see below).
- Repeat all year: Small, steady moves up. Ray's rates “only gone up, they haven't gone down.”
Telling your clients
Ray's way is to not make an announcement. Small moves on each job don't need one. For a new client who asks why you cost what you cost, you don't owe a long explanation.
You don't email all your clients and say, hey, guess what, guys? I'm more expensive. All you do is you just bump it up by 1% and then later on bump it up by 1%. And you play with those numbers.
My rates are even over time. They go up over time, but they don't spike around. I don't wake up one day and just double my prices.
Checklist
- What Ray says to a new client who questions his rates: “Look, there's a lot of factors that go into my rates. I'm not going to go over all of them in detail. These are the rates that I've been charging for quite a while. My clients are happy to pay them, and it just simply is what my rates are. However, I won't be offended if you do have somebody cheaper and they'll do a good job for you.”
You will lose the cheap clients, and that's the point
If most of your clients only stay because you're cheap, Ray's first fix is to find new ones. You don't have to drop the old clients, but your growth comes from clients who pay your real rate.
And yes, you will lose some clients when you do that, but that is simply one of the necessary steps.
And what this is gonna do is it's gonna act like a filter. It's gonna stop you from getting new clients who just feel you're too expensive. And it's gonna filter out the clients of yours that are maybe a little bit cheap and you just don't know they're cheap yet until your prices bump up a little bit. And they will naturally take themselves out of the mix as well.
So be careful with raising your prices just on one specific bid on one specific customer. In my experience, they're just going to come back and say yes anyways. But raising your prices across the board for everybody is really useful ...
Other ways to charge more
- Learn more skills: Ray: “if your labor is unskilled, then your prices are going to have to reflect that lack of skill.” Tile, electrical, plumbing and drywall texture all raise what you can charge.
- Get licensed: Ray: “When you have clients who want a luxury, you get to charge luxury prices.” Stay within what your license covers.
- Get efficient: A job priced by the job pays more per hour the faster you do it. Ray calls efficiency one of his biggest raises.
- Charge for estimates: Ray: “when you're charging for estimates, it implies that you're not desperate.”
Step-by-Step
- Know your minimum rate — Use the Hourly Rate Calculator to find the least you can charge per billable hour.
- Price by the job — Use job prices or line items instead of a posted hourly rate.
- Raise one line item at a time — When a job comes up again, raise its price 1 to 5 percent.
- Watch for pushback — If good clients push back, hold or back off a little and try again in a few months.
- Raise for everyone — Raise across the board, not just for one client you want to lose.
- Repeat through the year — Keep making small moves up and rerun your numbers when costs change.
Frequently Asked Questions
How often should a handyman raise prices?
Ray raises in small steps all year rather than one big jump. He looks at a line item again every three to six months and bumps it a little, backing off if good clients push back.
Should I tell my clients I'm raising prices?
Ray doesn't send an announcement. He raises prices on each job a little at a time. When a new client asks about his rates, he says they're what he's charged for a while and he won't be offended if they hire someone cheaper.
Will I lose clients if I raise my prices?
Some, yes. Ray says that is a necessary step if you want to earn more than $50,000 to $60,000 a year. Raising prices across the board filters out the clients who only hired you because you were cheap.
How do I know my prices are too low?
If nobody ever pushes back on your estimates, you're too busy to keep up, or you charge less than the minimum the Hourly Rate Calculator shows, your prices are too low.