Break-Even for a Handyman, Explained

Direct answer: Your break-even rate is what you must bring in for every billable hour just to pay all your business costs and pay yourself, with nothing left over as profit. Add up a year of business costs, add the salary you pay yourself, and divide by your billable hours for the year. Charge less than that and you're paying to work.
The free Hourly Rate Calculator does this math for you. It shows your break-even right under your hourly rate: everything your rate covers except profit. That's your dollar costs and your salary, plus the PTO, refunds and warranty, and tax percentages, because you have to pay those too. Your hourly rate adds your profit on top.
- $62 Ray's 2024 example break-even per billable hour
- $124,000 yearly overhead in that example, his pay included
- 2x your total work hours compared with billable hours
- 0% profit in a break-even number
What break-even means for a handyman
- Yearly costs: every recurring expense the business pays (insurance, phone, software, vehicle, fuel, and so on).
- Plus your pay: the salary you want the business to pay you.
- Plus the costs you set as percentages: PTO, refunds and warranty work, business taxes and sales taxes. You owe those whether or not you make a profit.
- No profit: break-even is the floor, not the goal.
- Divided by billable hours: hours on the job with tools in hand. The calculator takes your hours on the job per week times 52 weeks.
That's an internal rate that you have to meet just to break even, give yourself a paycheck and give yourself the benefits that you deserve ...
Your pay is part of overhead
New owners often leave their own pay out and call what's left “profit.” Ray counts the paycheck as a cost, just like a helper's wages.
And remember, a profit is what's left over after your paycheck. Your paycheck is actually part of your business's overhead. So, profit is what's left over after you've paid yourself.
And I want you to keep in mind your salary is an overhead expense for your business, just like the salary of any employee in your business is also an overhead expense.
Billable hours are about half the hours you work
Only hours on the job with tools in hand earn money. Driving, shopping, quotes, invoices and cleaning the van are real work, but nobody pays you for them directly. Count only billable hours, or your break-even will come out too low.
And yes, I already knew this, but you really have to come down all the way to the base and realize every hour you spend on the job requires at least an additional hour off the job.
I suggest something in the ballpark of 30 hours a week on the job, which is going to put you at 60 hours a week for the business, unless you want to do like I did and work like 90 hours a week total.
What goes into your yearly costs
These are the monthly categories built into the calculator. Enter what you actually pay, or a quote, and note where each number came from.
The point is, these are all of the recurring expenses that are just set in stone that you're going to have to pay all the time to be able to take care of all of your business.
Checklist
- Insurance: general liability, commercial auto, workers' comp, bonding, disability, life, health
- Licensing: professional and business license fees, LLC fees or registered agent
- Professional help: legal fees, bookkeeper or accounting software, accountant or tax prep
- Bank fees and business loan payments
- Software: CRM, other apps and AI tools, website and email hosting
- Business phone and internet
- Space: commercial lease or home office, utilities, office supplies
- Tools: maintenance and replacement, new equipment
- Vehicle: payment, lease or depreciation, fuel, maintenance and repairs
- Dump fees, uniforms and work clothing
- Marketing and advertising
- Retirement savings and self-employment taxes
- Training, certifications and industry events
The math, with Ray's own example
Ray's worked example from his 2024 Pricing Handbook: $124,000 a year of overhead, his pay included, over 40 billable hours a week for 50 weeks (2,000 hours), comes to $62 an hour.
We're looking at $124,000 per year of overhead if we go off of my numbers that I've put together for this scenario. Each hour of work, therefore, if we're 40 hours a week, 50 weeks a year, that means each, each hour of work is $62 of overhead.
So now that $62 an hour that we figured is the minimum we have to charge just to give ourselves a paycheck and have no buffer and just break even ...
- Add up a year of costs: Total your monthly costs and multiply by 12.
- Add your salary: The yearly pay you want the business to give you.
- Find your billable hours: Hours on the job per week times the weeks you'll work. The calculator uses 52 weeks; Ray's 2024 example used 50 to leave two weeks of vacation.
- Divide: Yearly costs plus salary, divided by billable hours, is your break-even per billable hour.
Break-even is not your rate
Break-even leaves nothing to grow on. That's why the calculator adds your profit percentage on top of it. The result is the hourly rate you should actually bill, and the gap between the two numbers is your profit.
Everything above was expenses. It's what you must make and what you must pay. Now, profit is optional.
And the beautiful thing is, it's going to take the number of hours you say you're willing to work on the job, your desired annual salary, all of your monthly set expenses, and all of your percentage-based expenses. It's going to take all of those, and it's going to finally give you your hourly rate.
- Break-even: Costs plus your pay (PTO, warranty and tax percentages included), per billable hour. Below it, you lose money.
- Hourly rate: Break-even plus your profit. The minimum to bill for each hour on the job.
- What you charge: Ray prices by the job. The rate is an internal number for checking that each job price clears it.
How to use your break-even
It's easy to say no to an offer to pay you $25 an hour to do a job when you know going in $25 an hour is my overhead. So I'm working for free when I'm working for $25 an hour.
And then you can go back and you can say, okay, well, you know, I don't think I can charge $180 an hour where I'm at. So let me go back and increase the number of hours I'm willing to work ...
So, to figure out if I should buy this new tool, I can say, okay, well, this tool is going to save me five minutes a day. And now I've set the value of my time at, let's call it $2 a minute. Five minutes a day, $2 a minute is going to be $10 a day, which is going to be $50 per week, which is going to be $200 per month times 12 months is going to be $2,400.
Checklist
- Turn down work that pays less than your break-even.
- Number too high for your market? Change the inputs: more billable hours, lower costs, or a different salary, and rerun it.
- Should I buy this tool? Minutes saved times the value of your time.
- Should I stock this part? Should I do free estimates? Should I charge extra for a far-away job? Ray asks each of these against his hourly number.
- Is this client worth it? Ray: “Should I continue working for this client who tends to waste 30 minutes or an hour of my time every time I do a job for them ...?”
- Update the numbers whenever a cost changes, and print the calculator's PDF for your accountant.
Step-by-Step
- Add up a year of costs — Total every recurring business expense per month and multiply by 12.
- Add your salary — Your pay is part of overhead, so add the yearly salary you want.
- Find your billable hours — Multiply your hours on the job per week by the weeks you work. Expect about one hour off the job for every hour on it.
- Divide — Costs plus salary (plus your PTO, warranty and tax percentages) divided by billable hours is your break-even per billable hour.
- Add your profit — Add your profit percentage on top of break-even to get the hourly rate you should bill.
Frequently Asked Questions
What is break-even for a handyman?
It's the amount you must bring in per billable hour to pay all your business costs and your own salary, with no profit left over. Yearly costs plus salary, divided by billable hours.
Is my salary part of break-even?
Yes. Ray counts your paycheck as overhead, like any employee's pay. Profit is what's left after you've paid yourself.
What's the difference between break-even and my hourly rate?
Break-even covers costs and pay, including PTO, warranty work and taxes. Your hourly rate adds your profit on top. Bill at least your hourly rate, and never below break-even.
How many billable hours should I plan on?
Ray suggests about 30 hours a week on the job, which he says means about 60 hours a week of total work, because every hour on the job takes about another hour off the job.