Handyman License Requirements in New Braunfels, TX

Texas does not issue a general “contractor” or “handyman” license at the state level. In New Braunfels (Comal County), a handyman can generally perform non-structural, cosmetic, and minor repair work without a state license, but state licenses are required for regulated trades (electrical, plumbing, HVAC, and certain fire protection work), and the City may require permits for many projects even when no state license is required. Texas does not have a single statewide handyman dollar-threshold exemption; instead, the key limits are (1) regulated-trade boundaries and (2) local permitting rules.

The contractor license threshold in TX is $None. Jobs at or above this amount (labor + materials) require a state contractor license. Operating above this threshold without a license is a legal violation.

⚠️ What Requires a Contractor License

The following work requires a state-issued contractor license in TX. Performing this work without a license exposes you to fines, stop-work orders, and civil liability:

Electrical contracting and most electrical repairs/alterations (new circuits, panel work, rewiring, troubleshooting) require Texas electrical licensing via TDLR.
Plumbing work beyond very minor maintenance typically requires a TSBPE-issued plumbing license; water heater replacement often requires a permit and may be restricted to licensed plumbers depending on local enforcement.
HVAC (air conditioning and refrigeration) installation/service/repair requires a TDLR ACR Contractor license; handling refrigerant generally requires EPA 608 certification.
Fire sprinkler systems and fire alarm work can be separately regulated/licensed (often through the State Fire Marshal/other programs depending on system type).
Any structural modifications (moving/removing load-bearing walls, framing changes, additions) generally require permits and may require engineered plans; while not a state “license,” you must comply with code and inspections.
Work that requires pulling a trade permit (electrical/plumbing/mechanical) may only be allowed by appropriately licensed contractors in that trade.

State Contractor Licensing Law (TX)

Even without a state handyman license, you cannot advertise or perform regulated electrical/plumbing/HVAC work without the applicable state license (or working under one, where allowed). Local building permits may still be required for items like water heaters, structural changes, service-panel work, additions, and certain replacements.

County Requirements — Comal County

Business license: Not required at the county level.

Special Jurisdictions & Zones

The following special jurisdictions may have separate licensing requirements:

Joint Base San Antonio (JBSA) (multiple installations) — If you are pursuing federal contracts, you generally need registration in SAM.gov and may need CAGE/UEI setup. For small repair work for a tenant or resident on-base, access still must be coordinated with the installation.
Opportunity Zones (New Braunfels / Comal County designated census tracts) — Verify whether a jobsite lies in an Opportunity Zone using official mapping tools; incentives are typically for investors, not service contractors.
New Braunfels Downtown Historic District / local historic landmarks (City Historic Preservation) — Confirm whether the address is a locally designated landmark/district before replacing windows/doors or altering facades; doing work without approvals can lead to stop-work orders and rework.

City Business License — New Braunfels

Not required at the city level.

Permit vs. Contractor License — The Legal Difference

A license is your legal authorization (usually state-issued for regulated trades) to perform or contract for certain kinds of work. A permit is job-specific approval (usually city/county) to perform work at a particular address and ensures inspections/code compliance. Even if you don’t need a state license for general handyman work, you may still need permits for the project—and permits may require licensed trade contractors for certain scopes.

Business Entity Registration (TX)

To operate legally you must register your business. LLC filing fee in TX: $300 (one-time).

Compliance Notes for New Braunfels, Texas

Insurance: Texas does not require general liability insurance for handymen statewide, but it is commonly required by clients and is strongly recommended. If you hire employees, workers’ comp is optional in Texas for many employers but you must follow Texas non-subscriber rules and post notices if you do not carry it.
Advertising risk: Do not advertise or imply you perform electrical/plumbing/HVAC services unless properly licensed; regulators can treat advertising as unlicensed activity.
Permitting: New Braunfels permits/inspections can apply even to small projects (especially water heaters, structural, and trade work). Pulling permits in the wrong name or doing work outside permit scope is a common compliance issue.
Sales tax: If you sell taxable items/materials or provide taxable services, you may need a Texas Sales and Use Tax Permit (generally $0 fee) and must collect/remit tax where required.
DBA rules: If operating as a sole proprietor under a business name, file an assumed name (DBA). If you form an LLC, operate under the LLC name (or file an assumed name for the LLC if you use a different brand name).

Legal Registration Steps for New Braunfels

Follow these steps to operate legally as a handyman in New Braunfels, Texas:

Step 1: Choose your business structure (LLC recommended for liability separation) and file the Texas LLC ($300) if desired.
Step 2: If using a name other than your legal name/entity name, file a DBA (assumed name) with the appropriate office (county clerk and/or Texas SOS depending on entity).
Step 3: Contact New Braunfels Development Services to confirm whether (a) any contractor registration is required to pull permits and (b) what permits apply to your typical handyman scope.
Step 4: Obtain general liability insurance (and commercial auto if using a work truck/van); keep COIs ready for clients and for any city registration/permit pulling.
Step 5: If you want to offer electrical/plumbing/HVAC, plan to subcontract to licensed trades or pursue the required Texas licenses through TDLR/TSBPE.

Work You Can Do Without a Contractor License

Interior/exterior painting, caulking, and minor surface prep (no lead abatement unless properly certified).
Minor drywall patching/texture repair and trim/baseboard repair or replacement.
Basic carpentry like installing shelves, cabinets (non-structural), and interior doors (no structural header changes).
Tile/vinyl/laminate flooring replacement (no structural subfloor reframing).
Fence repairs (typical residential repairs; new fence may still be subject to local rules/HOA and setbacks).

See all 8 tasks →

Research generated by AI. Verify all information with local authorities before making business decisions.